Salta al contenuto principale

RIDGID R84015 X2 Case Removal

Cosa ti serve

  1. RIDGID R84015 X2 Case Removal, RIDGID R84015 X2 Case Removal: passo 1, immagine 1 di 2 RIDGID R84015 X2 Case Removal, RIDGID R84015 X2 Case Removal: passo 1, immagine 2 di 2
    • Remove the backplate.

    • Using a Torx T20 screwdriver, remove the four screws attaching the back plate.

  2. RIDGID R84015 X2 Case Removal: passo 2, immagine 1 di 1
    • Remove the drill handle.

    • Using the Phillips #2 screwdriver, remove the five screws attaching the drill handle to the body.

  3. RIDGID R84015 X2 Case Removal: passo 3, immagine 1 di 2 RIDGID R84015 X2 Case Removal: passo 3, immagine 2 di 2
    • Remove the gear casing from the body.

    • Using the Philips #2 screwdriver, remove the four screws attaching the gear casing to the body.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Evan Long

Membro da: 04/15/10

262 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 15-48, Garner Spring 2010 Membro di Cal Poly, Team 15-48, Garner Spring 2010

CPSU-GARNER-S10S15G48

6 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 3,946