Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Introduzione

This guide will outline the steps on how to access the RIDGID R2740 motherboard. Motherboard failure can occur due to dust, overheating, and a buildup in debris.

  1. Unplug your device before proceeding..
    • Unplug your device before proceeding..

  2. Orient the sander so the Air Guard logo is facing you.
    • Orient the sander so the Air Guard logo is facing you.

    • Remove the single Torx TR20 screw.

  3. LCD iPhone Screen Fix Kits

    The budget option, covered by our Lifetime Warranty.

    Shop Kits

    LCD iPhone Screen Fix Kits

    Cut repair costs, not quality.

    Shop Kits
  4. Orient the device with the left side face up. Using a Phillips #1 bit, unscrew the 3 screws which hold the internal casing in place.
    • Orient the device with the left side face up.

    • Using a Phillips #1 bit, unscrew the 3 screws which hold the internal casing in place.

    • Gently remove the belt.

    • Using the Torx TR10 bit, unscrew the 10 screws which hold the external casing in place.

  5. Gently pull up on the motherboard chip set, pulling it directly from the device.
    • Gently pull up on the motherboard chip set, pulling it directly from the device.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 9

Tutti i Tempi: 84