Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

RCA Lyra x2400 Screen Replacement

Cosa ti serve

  1. RCA Lyra x2400 Screen Replacement, Battery: passo 1, immagine 1 di 3 RCA Lyra x2400 Screen Replacement, Battery: passo 1, immagine 2 di 3 RCA Lyra x2400 Screen Replacement, Battery: passo 1, immagine 3 di 3
    • Using slight pressure with your finger on the word "OPEN", slide the battery plate down.

    • Remove the battery plate.

    • Place your finger at the bottom of the battery.

    • Lift up on the battery until it pops out from the LYRA X2400.

  2. RCA Lyra x2400 Screen Replacement, Screen: passo 2, immagine 1 di 2 RCA Lyra x2400 Screen Replacement, Screen: passo 2, immagine 2 di 2
    • Remove the two Phillips screws from the silver cover at the top of the Lyra.

    • Slowly wiggle the silver cover while pulling it away from the device.

  3. RCA Lyra x2400 Screen Replacement: passo 3, immagine 1 di 2 RCA Lyra x2400 Screen Replacement: passo 3, immagine 2 di 2
    • Remove the two Phillips screws from the bottom of the device, next to the charger port and Compact Flash release button.

    • Pull the silver case from the bottom of the device.

  4. RCA Lyra x2400 Screen Replacement: passo 4, immagine 1 di 3 RCA Lyra x2400 Screen Replacement: passo 4, immagine 2 di 3 RCA Lyra x2400 Screen Replacement: passo 4, immagine 3 di 3
    • Carefully pry up the screen with a plastic opening tool.

    • Disconnect the screen's ribbon cable from the circuit board.

    • Remove the screen.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Emmett

Membro da: 04/11/13

1 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 17-3, Regan Spring 2013 Membro di Cal Poly, Team 17-3, Regan Spring 2013

CPSU-REGAN-S13S17G3

4 Membri

8 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 1

Tutti i Tempi: 272