Introduzione

This guide will show where to find the battery and how to replace it. If the drone does not have power or the battery is damaged, use this guide to help you.

Parti

Nessuna parte richiesta.

  1. The battery is accessible through the back of the drone.
    • The battery is accessible through the back of the drone.

    • Press the tabs on both sides of the white stripe to pull the battery out.

    Aggiungi Commento

  2. Now that the battery is out, remove the screws starting with the four smaller ones on the top part of the battery. After this, remove the last four on the side. Make sure to keep track of where each screw came from.
    • Now that the battery is out, remove the screws starting with the four smaller ones on the top part of the battery. After this, remove the last four on the side. Make sure to keep track of where each screw came from.

    • There should be one 7 mm Phillips head screw, three 6 mm Phillips head screws, and four 5 mm Phillips head screws.

    • There is another screw that is located where the arrow is pointed. You will need to take the other screws out first before you can get to this one.

    Aggiungi Commento

    • Remove the top piece, and gently pry the two halves apart. Divide the sticker if necessary.

    Aggiungi Commento

    • The battery is now removable from its container.

    • During reassembly, make sure the outlet is returned to its holder and faces the correct direction.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Connor Woitte

Membro da: 15/02/2018

537 Reputazione

3 Guide realizzate

Team

UW Stout, Team S8-G6, Ogden Spring 2018 Membro di UW Stout, Team S8-G6, Ogden Spring 2018

UWSTOUT-OGDEN-S18S8G6

3 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 6

Tutti i Tempi: 92