Salta al contenuto principale

Protocol Galileo Stealth Propeller Replacement

Cosa ti serve

  1. Protocol Galileo Stealth Propeller Replacement, Propeller: passo 1, immagine 1 di 1
    • Remove the chrome shaft cover by lightly pulling it away from the drone.

  2. Protocol Galileo Stealth Propeller Replacement: passo 2, immagine 1 di 1
    • Using a Phillips #000 screwdriver, remove the 7mm screw from the propeller stop.

    • Be sure to apply adequate pressure when removing the screw to prevent stripping it out.

  3. Protocol Galileo Stealth Propeller Replacement: passo 3, immagine 1 di 1
    • Remove the propeller stop from shaft by lightly pulling it away from the drone.

  4. Protocol Galileo Stealth Propeller Replacement: passo 4, immagine 1 di 1
    • Remove the propeller from shaft by lightly pulling it away from the drone.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

UW Stout, Team S8-G4, Ogden Spring 2018 Membro di UW Stout, Team S8-G4, Ogden Spring 2018

UWSTOUT-OGDEN-S18S8G4

4 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 360