Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Protocol Galileo Propeller Replacement

Cosa ti serve

  1. Protocol Galileo Propeller Replacement, Propeller: passo 1, immagine 1 di 2 Protocol Galileo Propeller Replacement, Propeller: passo 1, immagine 2 di 2
    • Use the heavy duty spudger tool to pry off metal caps by pushing the spudger up into the cap.

  2. Protocol Galileo Propeller Replacement: passo 2, immagine 1 di 1
    • Twist the white spindle sleeve counter clockwise to align locking pin inside with the opening.

  3. Protocol Galileo Propeller Replacement: passo 3, immagine 1 di 1
    • Use tweezers to remove locking pin.

  4. Protocol Galileo Propeller Replacement: passo 4, immagine 1 di 1
    • Pull off white spindle sleeve.

    • Take note of which side of the spindle sleeve is the top.

  5. Protocol Galileo Propeller Replacement: passo 5, immagine 1 di 2 Protocol Galileo Propeller Replacement: passo 5, immagine 2 di 2
    • Pull off propeller.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Team

UW Tacoma, Team 2-3, Rose Winter 2017 Membro di UW Tacoma, Team 2-3, Rose Winter 2017

UWT-ROSE-W17S2G3

4 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 266