Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

This guide will give detailed steps for replacing a propeller. This guide utilizes the heavy duty spudger tool and the tweezers.

Parti

Nessuna parte specificata.

  1. Use the heavy duty spudger tool to pry off metal caps by pushing the spudger up into the cap. Use the heavy duty spudger tool to pry off metal caps by pushing the spudger up into the cap.
    • Use the heavy duty spudger tool to pry off metal caps by pushing the spudger up into the cap.

  2. Twist the white spindle sleeve counter clockwise to align locking pin inside with the opening.
    • Twist the white spindle sleeve counter clockwise to align locking pin inside with the opening.

  3. APRI TUTTE LE SCHEDE

    Kit espansione RAM per Mac

    Acquista Kit

    Abbastanza RAM
    Per tutte le schede

    Acquista Kit
  4. Use tweezers to remove locking pin.
    • Use tweezers to remove locking pin.

  5. Pull off white spindle sleeve.
    • Pull off white spindle sleeve.

    • Take note of which side of the spindle sleeve is the top.

  6. Pull off propeller. Pull off propeller.
    • Pull off propeller.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Team

UW Tacoma, Team 2-3, Rose Winter 2017 Membro di UW Tacoma, Team 2-3, Rose Winter 2017

UWT-ROSE-W17S2G3

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 195