Salta al contenuto principale

Protocol Dronium 3x Controller Battery Replacement

Cosa ti serve

  1. Protocol Dronium 3x Controller Battery Replacement, Controller Battery: passo 1, immagine 1 di 2 Protocol Dronium 3x Controller Battery Replacement, Controller Battery: passo 1, immagine 2 di 2
    • Ensure the controller is powered off.

    • Using a Phillips #0 screwdriver, unscrew the screw holding the battery lid on the controller. Keep in mind that the screw will be attached to the lid.

    • Remove lid and screw.

  2. Protocol Dronium 3x Controller Battery Replacement: passo 2, immagine 1 di 1
    • Remove batteries from battery compartment.

    • Discard the used batteries.

    • Place new batteries in the controller in the correct orientation.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 153