Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the four 0.8mm Phillips #0 screws from the back casing of the remote.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the three 0.7mm Phillips #0 screws from the motherboard.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Move the motherboard up to allow room for the power bottom to become visible and loose.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Place the remote face up. Then pick up the broken power button and replace with a new button.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.