Introduzione

In this replacement guide you will learn the steps to replace the power button on your Protocol DURA VR drone remote.

Parti

Nessuna parte richiesta.

  1. Remove the four 0.8mm Phillips #0 screws from the back casing of the remote. Remove the four 0.8mm Phillips #0 screws from the back casing of the remote.
    • Remove the four 0.8mm Phillips #0 screws from the back casing of the remote.

  2. Remove the three  0.7mm Phillips #0 screws from the motherboard. Remove the three  0.7mm Phillips #0 screws from the motherboard.
    • Remove the three 0.7mm Phillips #0 screws from the motherboard.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Move the motherboard up to allow room for the power bottom to become visible and loose. Move the motherboard up to allow room for the power bottom to become visible and loose.
    • Move the motherboard up to allow room for the power bottom to become visible and loose.

  5. Place the remote face up. Then pick up the broken power button and replace with a new button.
    • Place the remote face up. Then pick up the broken power button and replace with a new button.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 68