Salta al contenuto principale

Propel Gyro-X Stabilizer Replacement

Cosa ti serve

  1. Propel Gyro-X Stabilizer Replacement, Top Propellor Blades: passo 1, immagine 1 di 1
    • Stabilizing links are easy to break. Be gentle when prying them off.

    • Place the tweezers on the sides of the links and pull straight away from the top point of connection.

  2. Propel Gyro-X Stabilizer Replacement: passo 2, immagine 1 di 2 Propel Gyro-X Stabilizer Replacement: passo 2, immagine 2 di 2
    • Remove the two 6.0 mm Phillips #00 screws from the rotors.

  3. Propel Gyro-X Stabilizer Replacement: passo 3, immagine 1 di 2 Propel Gyro-X Stabilizer Replacement: passo 3, immagine 2 di 2
    • Pull the rotors away from the mounting brackets.

  4. Propel Gyro-X Stabilizer Replacement, Stabilizer: passo 4, immagine 1 di 1
    • Remove the two 5mm PHillips #00 screws screws

  5. Propel Gyro-X Stabilizer Replacement: passo 5, immagine 1 di 2 Propel Gyro-X Stabilizer Replacement: passo 5, immagine 2 di 2
    • Using the tweezers twist the rotor attachment bracket apart.

  6. Propel Gyro-X Stabilizer Replacement: passo 6, immagine 1 di 1
    • Remove the two 6mm #00 screws

  7. Propel Gyro-X Stabilizer Replacement: passo 7, immagine 1 di 1
    • Pull up on the stabilizer assembly to remove it completely from the drive shaft.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Sarah Atmadja

Membro da: 04/09/15

404 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 17-2, Forte Spring 2015 Membro di Cal Poly, Team 17-2, Forte Spring 2015

CPSU-FORTE-S15S17G2

4 Membri

7 Guide realizzate

Un commento

Where can I get these stabilizers

lost ghost - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 6

Tutti i Tempi: 2,492