Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Promowide SP1790 Charging Port Replacement

Cosa ti serve

  1. Promowide SP1790 Charging Port Replacement, Battery Wire: passo 1, immagine 1 di 1
    • Locate the six screws on the back of the speaker.

  2. Promowide SP1790 Charging Port Replacement: passo 2, immagine 1 di 1
    • Unscrew each of the six screws, then set them aside.

  3. Promowide SP1790 Charging Port Replacement: passo 3, immagine 1 di 1
    • Gently remove the back cover of the speaker.

  4. Promowide SP1790 Charging Port Replacement: passo 4, immagine 1 di 1
    • Place the speaker upside down.

    • Remove the battery cover located in the center of the speaker.

  5. Promowide SP1790 Charging Port Replacement: passo 5, immagine 1 di 1
    • Locate and remove the four screws under each of the pads near the power socket.

  6. Promowide SP1790 Charging Port Replacement: passo 6, immagine 1 di 1
    • Gently remove the bottom.

    • Do NOT pull out or damage wires.

  7. Promowide SP1790 Charging Port Replacement: passo 7, immagine 1 di 1
    • Remove the single motherboard screw.

  8. Promowide SP1790 Charging Port Replacement: passo 8, immagine 1 di 1
    • Remove both of the screws holding the power socket to the bottom chassis.

  9. Promowide SP1790 Charging Port Replacement: passo 9, immagine 1 di 1
    • Desolder and remove the old wire.

    • Insert the new wire and solder it into place.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 6

Tutti i Tempi: 917