Introduzione

This guide provides the necessary information on fully disassembling the Proline HB25 hand blender.

  1. Unscrew the screw on the back of the product.
    • Unscrew the screw on the back of the product.

  2. Pull out the backtab of the housing.
    • Pull out the backtab of the housing.

    • Push in the snapfits with, for instance, a screwdriver.

    • Separate the housing with calibrated force.

    • Keep your fingers away from the housing and do not bend or break the housing.

    • Use a flathead screwdriver to push out the lower function button.

    • Remove the separating device.

    • Unscrew the hidden screw under the button.

    • Open the housing.

    • Unscrew the circuit board.

    • Unscrew the wire lock.

    • Push the housing of the button out of the housing.

    • Push on the side of the housing of the button to push the button out of the housing.

    • The spring can jump away when you push out the button.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 51