Presto PopLite 04820 Power Cord Replacement

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Introduzione

Shows how to replace the entire power cord. This may need to be done if the device shut off mid-use. Be sure that the PopLite is unplugged from the wall and has had time after use to cool down before working on the device.

Cosa ti serve

Passo 1 Baseplate

Presto PopLite 04820 Power Cord Replacement, Baseplate: passo 1, immagine 1 di 1

Be sure that the popper is unplugged before disassembly.
Turn Presto Popper upside down.

Traduci

Passo 2

Presto PopLite 04820 Power Cord Replacement: passo 2, immagine 3 di 3

Remove the four 9 mm Phillips #2 screws from the base.
Once all four screws are removed, take the base off.

Traduci

Passo 3 Power Cord

Presto PopLite 04820 Power Cord Replacement, Power Cord: passo 3, immagine 1 di 3

Presto PopLite 04820 Power Cord Replacement, Power Cord: passo 3, immagine 2 di 3

Presto PopLite 04820 Power Cord Replacement, Power Cord: passo 3, immagine 3 di 3

Untwist the two orange twist-on wire connectors.
Make a note of which wires are in each of the orange caps.

Traduci

Passo 4

Presto PopLite 04820 Power Cord Replacement: passo 4, immagine 3 di 3

Locate the plastic piece holding the power cord in place.
Take the metal spudger from the tool kit and pry this piece loose.
This plastic piece may take excessive force to pry out, just keep trying until it pops out.
Remove the power cord.