Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Presto PopLite 04820 Popping Chamber Base Replacement

Cosa ti serve

  1. Presto PopLite 04820 Popping Chamber Base Replacement, Baseplate: passo 1, immagine 1 di 1
    • Be sure that the popper is unplugged before disassembly.

    • Turn Presto Popper upside down.

  2. Presto PopLite 04820 Popping Chamber Base Replacement: passo 2, immagine 1 di 3 Presto PopLite 04820 Popping Chamber Base Replacement: passo 2, immagine 2 di 3 Presto PopLite 04820 Popping Chamber Base Replacement: passo 2, immagine 3 di 3
    • Remove the four 9 mm Phillips #2 screws from the base.

    • Once all four screws are removed, take the base off.

  3. Presto PopLite 04820 Popping Chamber Base Replacement, Popping Chamber Base: passo 3, immagine 1 di 2 Presto PopLite 04820 Popping Chamber Base Replacement, Popping Chamber Base: passo 3, immagine 2 di 2
    • Remove the four 13 mm Phillips #2 screws.

  4. Presto PopLite 04820 Popping Chamber Base Replacement: passo 4, immagine 1 di 1
    • Remove the entire cavity that holds the motor from the base of the PopLite.

    • Be gentle while taking the motor out of the base to avoid wire damage.

  5. Presto PopLite 04820 Popping Chamber Base Replacement: passo 5, immagine 1 di 2 Presto PopLite 04820 Popping Chamber Base Replacement: passo 5, immagine 2 di 2
    • Turn the popping chamber base sideways.

    • Now remove popping chamber base.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

USF Tampa, Team 2-5, Blackwell Fall 2015 Membro di USF Tampa, Team 2-5, Blackwell Fall 2015

USFT-BLACKWELL-F15S2G5

2 Membri

6 Guide realizzate

Un commento

Where can I get the new base from?

Barry - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 613