Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Locate QCPN#10669 which is a black hookup wire.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Measure out a 10cm length of wire.
-
Use a pair of flash cutters to carefully cut through the wire.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Your wire should look like this now. #testedit
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Measure 20mm from either end of the wire.
-
With the flash cutters remove the instulation that is covering the wire.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the insulation from the wire with a pair of flash cutters.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Your finished wire should now look like this.
-
Remember to twist of the ends of the wire with your fingers so that the wire strands are not loose.
-
Annulla: non ho completato questa guida.
Altre 6 persone hanno completato questa guida.