Salta al contenuto principale

Introduzione

Install an original Airport 802.11b card internally.

Parti

    • Turn the G4 over.

    • Remove the eight T8 Torx screws from the lower case.

  1. Using your thumbs, slide the lower case away from you.
    • Using your thumbs, slide the lower case away from you.

    • The lower case may stick in the front on a tab just above the center of the DVD drive. Be careful as you work the case off, or you may break the thin strip of plastic just above the drive.

    • Lift the lower case off.

  2. Batterie per PC portatili

    Batteries for all the top PC brands, backed by our Quality Guarantee.

    Acquista ora

    Batterie per PC portatili

    Batteries for all the top PC brands, backed by our Quality Guarantee.

    Acquista ora
  3. Your laptop should look approximately like this.
    • Your laptop should look approximately like this.

  4. Skip this step if your computer does not have an Airport card.
    • Skip this step if your computer does not have an Airport card.

    • Firmly grasp the plastic tab attached to the Airport card and pull up and to the left.

    • Disconnect the antenna cable from the left side of the Airport card.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Documenti Allegati

iRobot

Membro da: 24/09/2009

1 Reputazione

624 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 9,187