Introduzione

The bottom case slides off easily after removing a few T8 Torx screws.

Locate the battery release tab on the underside of the G4.
  • Locate the battery release tab on the underside of the G4.

  • Slide the battery release tab to the left and lift the battery out of the computer.

Aggiungi Commento

Remove the seven T8 Torx screws from the lower case.
  • Remove the seven T8 Torx screws from the lower case.

  • Using your thumbs, slide the lower case toward the front of the computer.

  • The lower case may stick in the front on a tab just above the center of the optical drive. Be careful as you work the case off, or you may break the thin strip of plastic just above the drive.

  • Lift the lower case off.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Documenti Allegati

iRobot

Membro da: 24/09/2009

1 Reputazione

774 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 8

Tutti i Tempi: 5,302