Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
This guide is only used as a prereq to other guides requiring rear bezel removed.
Cosa ti serve
-
-
Remove the single Phillips screw from the lower left and right corners of the display.
-
-
-
Insert the flat end of a spudger between the front display bezel and the plastic rim attached to the rear bezel near the lower right corner of the display.
-
While carefully prying the rear display bezel away from the display assembly, use a small flathead screwdriver to pry the small steel clip nearest the bottom right corner of the display away from the edge of the front display bezel.
-
Repeat the above procedure until you've released all the clips along the right side of the display.
-
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.