Aggiusta la tua roba Comunità Store

PowerBook G3 Pismo Keyboard Replacement

Introduzione

Replacing this keyboard is easy. It requires no tools and takes only a few minutes.

Cosa ti serve

  1. PowerBook G3 Pismo Keyboard Replacement, Keyboard: passo 1, immagine 1 di 1

    • Turn the keyboard locking screw so that it is parallel to the space bar.

    • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

    • Lift the keyboard out by pulling it up and away from you. Rest the keyboard, face down, on top of the track pad.

    Traduci

  3. PowerBook G3 Pismo Keyboard Replacement: passo 2, immagine 1 di 1

    • Pull the keyboard ribbon straight up from the logic board. Place the keyboard aside.

    • The connector may be tight. Gently rock the connector from side to side while pulling directly upward to free it. You can use this technique on many of the cards and cables you'll be disconnecting.

    • Make sure you have removed the laptop battery and CD/DVD modules from the expansion bays before proceeding.

    Traduci

  4. PowerBook G3 Pismo Keyboard Replacement: passo 3, immagine 1 di 1

    • Your laptop should look approximately like this.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Documenti Allegati

Autore

con 3 altri collaboratori

iRobot

Membro da: 09/24/09

1 Reputazione

636 Guide realizzate

Distintivi: 36

+33 altri distintivi

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 20

Tutti i Tempi: 5,966