1. Remove the Ni-Cad battery from the PowerBook 180.
    • Remove the Ni-Cad battery from the PowerBook 180.

    • Slide the arrows toward the front of the computer until the battery can slide out.

    Aggiungi Commento

  2. Removing the screws securing the bottom plate from the PowerBook 180.
    • Removing the screws securing the bottom plate from the PowerBook 180.

    • There are 5 Torx T8 screws, 4 of which are located on the bottom and 1 on the back above the modem port.

    Aggiungi Commento

  3. GIVE TOOLS. FIX FOREVER.

    GIVE TOOLS.

    FIX FOREVER.

    Spread the Fixmas cheer.

    GIVE TOOLS. FIX FOREVER.

    Spread the Fixmas cheer.

    • Your computer should look like the two pictures after the bottom plate is removed.

    Aggiungi Commento

    • Locate the modem board, which is next to the DC-in port.

    • There are two Torx T8 screws marked in red in the pictures. Remove these screws and pull up on the modem board to remove.

    • To reassemble your PowerBook, follow these instructions in reverse.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Jack Byrnes

Membro da: 17/10/2010

1.160 Reputazione

2 Guide realizzate

Team

Master Techs Membro di Master Techs

Community

279 Membri

758 Guide realizzate

Great guide. Worked for me of the Powerbook 140. Thanks!

Jack - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 990