Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

PowerA ProEX Xbox 360 Wired Controller Buttons Replacement

Cosa ti serve

  1. PowerA ProEX Xbox 360 Wired Controller Buttons Replacement, Buttons: passo 1, immagine 1 di 2 PowerA ProEX Xbox 360 Wired Controller Buttons Replacement, Buttons: passo 1, immagine 2 di 2
    • Disassemble the case by removing the 8 screws, indicated in red on the picture, that hold the back of the case to the front of the case using a J0 screwdriver.

  2. PowerA ProEX Xbox 360 Wired Controller Buttons Replacement: passo 2, immagine 1 di 2 PowerA ProEX Xbox 360 Wired Controller Buttons Replacement: passo 2, immagine 2 di 2
    • The case should come apart easily. If not, use a spudger to pry the back from the front of the case.

  3. PowerA ProEX Xbox 360 Wired Controller Buttons Replacement: passo 3, immagine 1 di 3 PowerA ProEX Xbox 360 Wired Controller Buttons Replacement: passo 3, immagine 2 di 3 PowerA ProEX Xbox 360 Wired Controller Buttons Replacement: passo 3, immagine 3 di 3
    • Using a pair of tweezers, remove each button and replace it with a new one.

    • A Button

    • B Button

    • X Button

    • Y Button

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 7 persone hanno completato questa guida.

Team

UMass Dartmouth, Team 3-1, Isaacson Fall 2016 Membro di UMass Dartmouth, Team 3-1, Isaacson Fall 2016

UMASSD-ISAACSON-F16S3G1

3 Membri

1 Guida realizzata

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 15

Ultimi 30 Giorni: 70

Tutti i Tempi: 3,734