Aggiusta la tua roba Comunità Store

PowerA Enhanced Wireless Controller Motherboard Replacement

Introduzione

This guide will show you how to access and replace the motherboard of your PowerA Enhanced Wireless Controller for Nintendo Switch. Replacing the motherboard is a necessary step for fixing stick drift and power-related issues on your controller. Other motherboard issues are often characterized by unresponsive buttons and your controller failing to immediately turn on.

Before beginning the repair process, it's important to remove the batteries from your controller to ensure your safety during the repair and prevent any additional issues. Step 1 of this guide will show you how to access the battery compartment to remove the batteries.

Cosa ti serve

  1. PowerA Enhanced Wireless Controller Motherboard Replacement, Motherboard: passo 1, immagine 1 di 3 PowerA Enhanced Wireless Controller Motherboard Replacement, Motherboard: passo 1, immagine 2 di 3 PowerA Enhanced Wireless Controller Motherboard Replacement, Motherboard: passo 1, immagine 3 di 3

    • Remove the battery cover by pressing down on the lever located on the top of the cover.

    • Apply pressure until it clicks out of place, and pull it off.

    Modifica

  2. PowerA Enhanced Wireless Controller Motherboard Replacement: passo 2, immagine 1 di 1

    • Remove all eight screws using the J0 screwdriver.

    Modifica

  4. PowerA Enhanced Wireless Controller Motherboard Replacement: passo 3, immagine 1 di 2 PowerA Enhanced Wireless Controller Motherboard Replacement: passo 3, immagine 2 di 2

    • Insert the iFixit opening tool into the seam and gently pry the cover plate up.

    • Remove the cover plate once it is loosened.

    Modifica

  5. PowerA Enhanced Wireless Controller Motherboard Replacement: passo 4, immagine 1 di 3 PowerA Enhanced Wireless Controller Motherboard Replacement: passo 4, immagine 2 di 3 PowerA Enhanced Wireless Controller Motherboard Replacement: passo 4, immagine 3 di 3

    • Remove all three screws securing the motherboard using the J00 screwdriver.

    • Remove the motherboard.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Autore

con 5 altri collaboratori

Alberto Del Calvo Lopez

Membro da: 10/10/19

227 Reputazione

1 Guida realizzata

Distintivi: 8

+5 altri distintivi

Team

USF Tampa, Team S1-G5, Leahy Fall 2019 Membro di USF Tampa, Team S1-G5, Leahy Fall 2019

USFT-LEAHY-F19S1G5

3 Membri

10 Guide realizzate

Un commento

Je cherche un couvercle de batterie pour ma manette switch

Auriez-vous un site où il est possible de s’en procurer un ?

Merci

josselin cornet - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 51

Tutti i Tempi: 2,820