Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Power Macintosh G3 Blue and White RAM Replacement

Introduzione

My RAM configuration may differ from yours, but the process is exactly the same.

Cosa ti serve

  1. Power Macintosh G3 Blue and White RAM Replacement, RAM: passo 1, immagine 1 di 1

    • Unfortunately, I am unable to provide OG content for this step due to my PowerMac’s outer case being severely damaged. Once I get my new outer case I will update this step.

    • Lift the latch on the right side panel to reveal the internals of the Power Mac.

    • If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

    Traduci

  3. Power Macintosh G3 Blue and White RAM Replacement: passo 2, immagine 1 di 1

    • Push the white tabs next to where your RAM is located away form the RAM chip itself.

    • The RAM chips should move up a tad and become somewhat loose.

    • Your RAM configuration may vary. This process is done the exact same way no matter what your RAM placement looks like.

    Traduci

  4. Power Macintosh G3 Blue and White RAM Replacement: passo 3, immagine 1 di 2 Power Macintosh G3 Blue and White RAM Replacement: passo 3, immagine 2 di 2

    • Pull the RAM chips out of the RAM slots.

    • That's all folks! That wasn't too hard, was it?

    • Second image: RAM remains

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Autore

con 1 altro collaboratore

[deleted]

Membro da: 08/28/18

26.373 Reputazione

21 Guide realizzate

Distintivi: 51

+48 altri distintivi

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 14

Tutti i Tempi: 945