Introduzione

My RAM configuration may differ from yours, but the process is exactly the same.

Strumenti

Nessun attrezzo richiesto.

Parti

  1. Unfortunately, I am unable to provide OG content for this step due to my PowerMac’s outer case being severely damaged. Once I get my new outer case I will update this step.
    • Unfortunately, I am unable to provide OG content for this step due to my PowerMac’s outer case being severely damaged. Once I get my new outer case I will update this step.

    • Lift the latch on the right side panel to reveal the internals of the Power Mac.

      • If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

    Aggiungi Commento

  2. Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
  3. Push the white tabs next to where your RAM is located away form the RAM chip itself.
    • Push the white tabs next to where your RAM is located away form the RAM chip itself.

      • The RAM chips should move up a tad and become somewhat loose.

    • Your RAM configuration may vary. This process is done the exact same way no matter what your RAM placement looks like.

    Aggiungi Commento

    • Pull the RAM chips out of the RAM slots.

    • That's all folks! That wasn't too hard, was it?

    • Second image: RAM remains

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Aaron Cooke

Membro da: 28/08/2018

14.692 Reputazione

22 Guide realizzate

Team

NIWOTech Membro di NIWOTech

Community

0 Membri

0 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 28

Tutti i Tempi: 61