Strumenti

Nessun attrezzo richiesto.

Parti

  1. Unfortunately, I am unable to provide OG content for this step due to my Power Mac’s outer case being severely damaged. Once I get my new outer case I will update this step.
    • Unfortunately, I am unable to provide OG content for this step due to my Power Mac’s outer case being severely damaged. Once I get my new outer case I will update this step.

    • Lift the latch on the right side panel to reveal the internals.

      • If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

    Aggiungi Commento

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Locate the PRAM battery.
    • Locate the PRAM battery.

    • The PRAM battery is usually at the top right corner of the logic board.

    Aggiungi Commento

    • Lift the battery out of the PRAM battery holder.

      • What I did to free the PRAM battery is I broke the plastic battery holder identical to the circled one on the other side of the PRAM battery, then I was able to free the PRAM battery. I couldn't get the PRAM battery to budge without breaking the holder.

      • Don't be worried, breaking the plastic holder won't cause much damage nor will it hinder the ability for the PRAM battery to stay in place. Only break one holder, though.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Aaron Cooke

Membro da: 28/08/2018

14.629 Reputazione

22 Guide realizzate

Team

NIWOTech Membro di NIWOTech

Community

0 Membri

0 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 18

Tutti i Tempi: 41