Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Power Mac G4 MDD RAM Replacement

Cosa ti serve

  1. Power Mac G4 MDD RAM Replacement, Case: passo 1, immagine 1 di 2 Power Mac G4 MDD RAM Replacement, Case: passo 1, immagine 2 di 2
    • The Power Mac G4 MDD: the last, and the fastest G4-based Mac. This computer boasted up to a Dual 1.42GHz PowerPC G4 CPU (though I have a single 1.25GHz).

    • Two USB 1.1 Ports

    • Assorted Audio

    • Video (ADC & DVI)

    • Networking (RJ-45 Ethernet/56k Modem)

    • Some later model MDD's (such as the dual 1.42GHz) Have a FireWire 800 Port Here:

  2. Power Mac G4 MDD RAM Replacement: passo 2, immagine 1 di 3 Power Mac G4 MDD RAM Replacement: passo 2, immagine 2 di 3 Power Mac G4 MDD RAM Replacement: passo 2, immagine 3 di 3
    • Unplug the computer.

    • Unplug the power supply and all external connections from the computer.

    • Pull on the side lever and lower the side of the case.

  3. Power Mac G4 MDD RAM Replacement, RAM: passo 3, immagine 1 di 3 Power Mac G4 MDD RAM Replacement, RAM: passo 3, immagine 2 di 3 Power Mac G4 MDD RAM Replacement, RAM: passo 3, immagine 3 di 3
    • The ram is between the graphics card, and the CPU, and removal is simple. Push the tabs down on both sides, this will free the ram, then lift it out.

    • The MDD uses a maximum of 2GB PC2700 DDR RAM (512MB X4) and has 4 slots.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 18 persone hanno completato questa guida.

Chris Green

Membro da: 10/11/09

36.978 Reputazione

49 Guide realizzate

Team

Master Techs Membro di Master Techs

Community

322 Membri

2.519 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 21

Tutti i Tempi: 12,348