Salta al contenuto principale

Power Mac G4 Cube Airport Card Replacement

  1. Power Mac G4 Cube Airport Card Replacement, Remove Cube Core: passo 1, immagine 1 di 3 Power Mac G4 Cube Airport Card Replacement, Remove Cube Core: passo 1, immagine 2 di 3 Power Mac G4 Cube Airport Card Replacement, Remove Cube Core: passo 1, immagine 3 di 3
    • Release the handle at the bottom of the Power Mac G4 Cube by pushing it down. Slowly pull out the cube by holding the end of the handle.

    • Watch for any parts that may become entangled with the outer case.

    • Push back the handle after you have taken the core out of the case.

  2. Power Mac G4 Cube Airport Card Replacement, Accessing AirPort Card: passo 2, immagine 1 di 2 Power Mac G4 Cube Airport Card Replacement, Accessing AirPort Card: passo 2, immagine 2 di 2
    • Pull outwards on the antenna cable.

    • The cable should pop out of the card without much force.

    • Pull on the clear tab outwards to remove the existing AirPort card

    • Slide in the new AirPort card.

    • Reconnect the antenna cable.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 8 persone hanno completato questa guida.

Ryan Chun

Membro da: 06/24/10

1.076 Reputazione

7 Guide realizzate

Team

Cal Poly, Team 2-7, Johann Summer 2010 Membro di Cal Poly, Team 2-7, Johann Summer 2010

CPSU-JOHANN-R10S2G7

5 Membri

14 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 19

Tutti i Tempi: 9,805