Porter-Cable PCE211 Grip Replacement

Introduzione

If you need to replace the grip of your Porter-Cable PCE211 impact wrench, follow this guide. You'll need to remove the grip to access the switch as well.

Be sure to turn off the device and unplug from the power source prior to beginning this repair.

Cosa ti serve

Passo 1 Gearcase

Porter-Cable PCE211 Grip Replacement, Gearcase: passo 1, immagine 1 di 2

Porter-Cable PCE211 Grip Replacement, Gearcase: passo 1, immagine 2 di 2

Using the Hex Security SAE 7/32", remove the four 10 mm socket screws at the base of the gearcase.

Modifica

Passo 2

Porter-Cable PCE211 Grip Replacement: passo 2, immagine 3 di 3

Grip the body of the impact wrench with one hand and the gearcase in the other and firmly pull to remove it.
Be careful about any loose parts when removing the head.

Modifica

Passo 3 Rear Housing

Porter-Cable PCE211 Grip Replacement, Rear Housing: passo 3, immagine 1 di 2

Porter-Cable PCE211 Grip Replacement, Rear Housing: passo 3, immagine 2 di 2

Remove the four 6 mm screws using a Phillips #2 screwdriver.
The screws are tight so you will need to use a bit of arm strength.

Modifica

Passo 4

Pull the rear housing off the back of the impact wrench.
Be careful when removing the rear case that loose parts don't get damaged.

Modifica

Passo 5 Anvil

Porter-Cable PCE211 Grip Replacement, Anvil: passo 5, immagine 1 di 3

Porter-Cable PCE211 Grip Replacement, Anvil: passo 5, immagine 2 di 3

Porter-Cable PCE211 Grip Replacement, Anvil: passo 5, immagine 3 di 3

Firmly pull the to remove drill bit holder also known as the anvil.
Before replacing the anvil, lubricate the base for the best performance.

Modifica

Passo 6 Motor

Porter-Cable PCE211 Grip Replacement, Motor: passo 6, immagine 1 di 3

Porter-Cable PCE211 Grip Replacement, Motor: passo 6, immagine 2 di 3

Porter-Cable PCE211 Grip Replacement, Motor: passo 6, immagine 3 di 3

This section tends to get messy so it would be best to have a paper towel or microfiber towel handy.
Pull the motor out with your hands.

Modifica

Passo 7

Porter-Cable PCE211 Grip Replacement: passo 7, immagine 3 di 3

Wipe out the old grease with a towel. Use the appropriate motor grease for electric tools to lubricate the top area, base of the motor, and the space the motor sits.

Modifica