Aggiusta la tua roba Comunità Store

Porter-Cable PC60TAG Power Cord Replacement

Introduzione

Often times power cords can get damaged through long-term use, or mishandling of the device. Whatever the case, the power cord of the Porter-Cable PC60TAG can be replaced in a few easy steps.

Cosa ti serve

  1. Porter-Cable PC60TAG Power Cord Replacement, Power Cord: passo 1, immagine 1 di 1

    • Using the Phillips #2 screwdriver, remove the 3/4" Phillips head screw on the back cover.

    • Unplug the grinder before disassembling.

    Modifica

  2. Porter-Cable PC60TAG Power Cord Replacement: passo 2, immagine 1 di 1

    • Holding the front of the device, carefully slide the back cover over the cord.

    Modifica

  4. Porter-Cable PC60TAG Power Cord Replacement: passo 3, immagine 1 di 1

    • Using the Phillips #2 screwdriver, remove the two 1/2" Phillips head screws securing the cord grip.

    Modifica

  5. Porter-Cable PC60TAG Power Cord Replacement: passo 4, immagine 1 di 1

    • Using the Phillips #2 screwdriver, loosen, but do not remove, the two terminal screws securing the black and white wires from the power cord.

    Modifica

  6. Porter-Cable PC60TAG Power Cord Replacement: passo 5, immagine 1 di 1

    • Careful remove each wire from the power cord from underneath the terminals.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 9

Tutti i Tempi: 441