Aggiusta la tua roba Comunità Store

Polyconcept 900-MHz Retro Cordless Telephone Device Antenna Replacement

Introduzione

Sometimes users have trouble with static on their phone meaning the connection between the handset and base may be faulty. This guide shows how to replace the antenna on the base of the phone.

Cosa ti serve

  1. Polyconcept 900-MHz Retro Cordless Telephone Device Antenna Replacement, Removing the Antenna Screw: passo 1, immagine 1 di 3 Polyconcept 900-MHz Retro Cordless Telephone Device Antenna Replacement, Removing the Antenna Screw: passo 1, immagine 2 di 3 Polyconcept 900-MHz Retro Cordless Telephone Device Antenna Replacement, Removing the Antenna Screw: passo 1, immagine 3 di 3

    • Inside the base cover, locate the screw holding the antenna in place and use a Philips #00 screwdriver to remove the 6mm screw.

    Traduci

  3. Polyconcept 900-MHz Retro Cordless Telephone Device Antenna Replacement, Removing the Antenna Foot: passo 2, immagine 1 di 2 Polyconcept 900-MHz Retro Cordless Telephone Device Antenna Replacement, Removing the Antenna Foot: passo 2, immagine 2 di 2

    • Grasp the plastic antenna foot and pull toward you.

    Traduci

  4. Polyconcept 900-MHz Retro Cordless Telephone Device Antenna Replacement, Removing the Antenna: passo 3, immagine 1 di 2 Polyconcept 900-MHz Retro Cordless Telephone Device Antenna Replacement, Removing the Antenna: passo 3, immagine 2 di 2

    • Pull antenna from the top side of the phone base cover.

    • It helps if you gently wiggle the antenna back and forth to loosen the clips.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 5

Tutti i Tempi: 350