Aggiusta la tua roba Comunità Store

Polaroid PMID701i 10 Panel Replacement

Introduzione

Prerequisite Only

Cosa ti serve

  1. Polaroid PMID701i 10 Panel Replacement, Panel: passo 1, immagine 1 di 2 Polaroid PMID701i 10 Panel Replacement, Panel: passo 1, immagine 2 di 2

    • Turn off and unplug the device before starting replacement.

    • Flip the device so that the screen faces down, with the back facing up.

    • The back panel attaches to the device with four 4.0mm long screws, one at each corner, indicated by the red circles in the picture.

    • Unscrew the four screws with a PH000 screwdriver.

    Modifica

  2. Polaroid PMID701i 10 Panel Replacement: passo 2, immagine 1 di 2 Polaroid PMID701i 10 Panel Replacement: passo 2, immagine 2 di 2

    • Flip the device over so that the screen faces up, and the back faces down.

    • Separate the front panel using the Opening Tool on a corner to create an opening.

    • Removing the frame for the first time may take a significant amount of force.

    • Run the tool along the seams of the device to open up all the sides.

    Modifica

  4. Polaroid PMID701i 10 Panel Replacement: passo 3, immagine 1 di 1

    • Removing the panel too quickly may damage the cable that attaches parts between the two panels.

    • Gently lift the top panel from the bottom panel.

    Modifica

  5. Polaroid PMID701i 10 Panel Replacement: passo 4, immagine 1 di 2 Polaroid PMID701i 10 Panel Replacement: passo 4, immagine 2 di 2

    • The flexible flat cables (FFC) attach to parts in the bottom panel with zero insertion force (ZIF) connectors.

    • Use the Opening tool to flip up the black retaining flap on the smaller connector.

    • Gently lift the cable, parallel to the panel, to detach it.

    Modifica

  6. Polaroid PMID701i 10 Panel Replacement: passo 5, immagine 1 di 2 Polaroid PMID701i 10 Panel Replacement: passo 5, immagine 2 di 2

    • Use the Opening tool to flip up the black retaining flap on the larger connector.

    • Gently lift the cable, parallel to the panel, to detach it.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 2 altri collaboratori

Amy Li

Membro da: 01/31/17

627 Reputazione

5 Guide realizzate

Distintivi: 8

+5 altri distintivi

Team

Baylor, Team 3-4, Whitney Spring 2017 Membro di Baylor, Team 3-4, Whitney Spring 2017

BU-WHITNEY-S17S3G4

3 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 7

Tutti i Tempi: 111