Salta al contenuto principale

Polaroid Automatic 100 Spread Roll Replacement

Cosa ti serve

  1. Polaroid Automatic 100 Spread Roll Replacement, Spread Roll: passo 1, immagine 1 di 2 Polaroid Automatic 100 Spread Roll Replacement, Spread Roll: passo 1, immagine 2 di 2
    • Push the lever on the bottom of the camera towards the left.

    • Open the rear door of the camera.

  2. Polaroid Automatic 100 Spread Roll Replacement: passo 2, immagine 1 di 3 Polaroid Automatic 100 Spread Roll Replacement: passo 2, immagine 2 di 3 Polaroid Automatic 100 Spread Roll Replacement: passo 2, immagine 3 di 3
    • Unlatch the red clip on the side.

    • Lift the rollers up.

    • Position the camera with the back cover closest to you.

  3. Polaroid Automatic 100 Spread Roll Replacement: passo 3, immagine 1 di 3 Polaroid Automatic 100 Spread Roll Replacement: passo 3, immagine 2 di 3 Polaroid Automatic 100 Spread Roll Replacement: passo 3, immagine 3 di 3
    • Remove the rear roll by using the plastic opening tool to take it off the metal frame.

    • Then remove the front roll by pushing away from you with the plastic opening tool.

  4. Polaroid Automatic 100 Spread Roll Replacement: passo 4, immagine 1 di 1
    Attrezzo utilizzato in questo passaggio:
    Flathead 3/32" or 2.5 mm Screwdriver
    $5.49
    Compra
    • Unscrew the three 2.5 mm screws (attached to the metal plate) with a 3.0 flathead screwdriver. Then take off the metal plate.

  5. Polaroid Automatic 100 Spread Roll Replacement: passo 5, immagine 1 di 1
    • Pull the support rod out.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Katie Miller

Membro da: 04/14/15

680 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 4-3, Maness Spring 2015 Membro di Cal Poly, Team 4-3, Maness Spring 2015

CPSU-MANESS-S15S4G3

4 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 16

Tutti i Tempi: 673