Aggiusta la tua roba Comunità Store

Pokewalker Battery Replacement

Introduzione

This is a short guide for replacing a pokewalker battery

Cosa ti serve

  1. Pokewalker Battery Replacement, Battery: passo 1, immagine 1 di 1

    • Locate the Screw on the Back of the Pokewalker.

    Modifica

  2. Pokewalker Battery Replacement: passo 2, immagine 1 di 1

    • Remove the Screw with a Phillips #0 Screwdriver

    • The screw is attached to the rear case with washers. don't worry about losing it.

    Modifica

  4. Pokewalker Battery Replacement: passo 3, immagine 1 di 1

    • Remove the Rear Cover from the Device

    Modifica

  5. Pokewalker Battery Replacement: passo 4, immagine 1 di 1

    • Use the flat end of a Spudger to Remove the Battery

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 8 persone hanno completato questa guida.

Autore

con 1 altro collaboratore

Winni Stuart

Membro da: 04/13/14

417 Reputazione

2 Guide realizzate

Distintivi: 10

+7 altri distintivi

2 Commenti

The battery must be placed positive side facing up if I am correct.

I just dug my pokewalker out of my closet. Been years since it has been used. Putting in an effort to get it running again.

Thanks for the tutorial.

Jake Allen - Replica

I just got my Pokéwalker up and running again as well. Nintendo's stuff is always so well made.

signature -

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 35

Ultimi 7 Giorni: 135

Ultimi 30 Giorni: 523

Tutti i Tempi: 25,238