Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Make sure you have a proper three pin XLR cable.
-
Grab the female end of the cable (plug with three holes).
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Line up the pins in the end of the microphone (microphone connecter) with the holes in the XLR cable.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Once the pins are aligned, push the cable into the bottom end of the microphone. You should hear a click.
-
Annulla: non ho completato questa guida.
Altre 13 persone hanno completato questa guida.
21 Commenti
how i repair the PG48 the XLR conector moves in and out when the cable ar plugged. The conector male in the microphone have an screw but that one not works...
What am i do?
If you have an idea to the answer or any tip to resolve this trouble feel fre to tweet me.
@ Theradioholic
on
do it in reverse? you have to press the button though on the male end...