Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

PlayStation Vita Wireless Card Replacement

Introduzione

This guide takes you through the process of installing the Wireless Card on the PlayStation Vita.

Cosa ti serve

  1. PlayStation Vita Wireless Card Replacement, Case Separation: passo 1, immagine 1 di 2 PlayStation Vita Wireless Card Replacement, Case Separation: passo 1, immagine 2 di 2

    • Power off and remove the memory card.

    • Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back casing.

    Traduci

  2. PlayStation Vita Wireless Card Replacement: passo 2, immagine 1 di 3 PlayStation Vita Wireless Card Replacement: passo 2, immagine 2 di 3 PlayStation Vita Wireless Card Replacement: passo 2, immagine 3 di 3

    • Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.

    • Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover.

    Traduci

  3. PlayStation Vita Wireless Card Replacement: passo 3, immagine 1 di 2 PlayStation Vita Wireless Card Replacement: passo 3, immagine 2 di 2

    • Remove the two 5.4mm Phillips #00 screws on the bottom of the device near the charging port.

    Traduci

  4. PlayStation Vita Wireless Card Replacement: passo 4, immagine 1 di 3 PlayStation Vita Wireless Card Replacement: passo 4, immagine 2 di 3 PlayStation Vita Wireless Card Replacement: passo 4, immagine 3 di 3

    • Beginning at the sides of the device, use a plastic opening tool to separate the front and rear cases.

    • Continue working your way around the device gently prying it open.

    • There are still wires holding the front and rear cases together. You may damage the connections if you yank the cases completely apart.

    Traduci

  6. PlayStation Vita Wireless Card Replacement: passo 5, immagine 1 di 2 PlayStation Vita Wireless Card Replacement: passo 5, immagine 2 di 2

    • Gently separate the two cases, minding the battery and the touch screen controller connectors holding the two cases together.

    Traduci

  7. PlayStation Vita Wireless Card Replacement: passo 6, immagine 1 di 1

    • Using a spudger, free the touch screen controller flex cable by gently prying up the connection.

    Traduci

  8. PlayStation Vita Wireless Card Replacement: passo 7, immagine 1 di 1

    • Free the battery cable by gently prying up on the connection with a spudger.

    Traduci

  9. PlayStation Vita Wireless Card Replacement: passo 8, immagine 1 di 1

    • Separate the front and rear cases.

    Traduci

  10. PlayStation Vita Wireless Card Replacement, Wireless Card: passo 9, immagine 1 di 3 PlayStation Vita Wireless Card Replacement, Wireless Card: passo 9, immagine 2 di 3 PlayStation Vita Wireless Card Replacement, Wireless Card: passo 9, immagine 3 di 3

    • Using the pointy end of the spudger, disconnect the three antenna cable connectors on top of the wireless card.

    • Deroute the antenna cables so that they are out of the wireless card casing. Rest the wires out of the way.

    Traduci

  11. PlayStation Vita Wireless Card Replacement: passo 10, immagine 1 di 2 PlayStation Vita Wireless Card Replacement: passo 10, immagine 2 di 2

    • Hook the spudger beneath the tab on the wireless card casing and release the tab.

    • Peel up and remove the wireless card casing.

    Traduci

  12. PlayStation Vita Wireless Card Replacement: passo 11, immagine 1 di 2 PlayStation Vita Wireless Card Replacement: passo 11, immagine 2 di 2

    • Remove the two 4.4mm Phillips #00 screws on the wireless card.

    • The wireless card will naturally pop out at an angle.

    • Pull out the wireless card.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Autore

con 3 altri collaboratori

Brittany McCrigler

Membro da: 03/05/12

89.017 Reputazione

131 Guide realizzate

Distintivi: 48

+45 altri distintivi

Team

iFixit Membro di iFixit

Staff

135 Membri

17.198 Guide realizzate

4 Commenti

i am takig my vita apart (moving all boards/chips into new oled lcd screen/ front part) and am having trouble taking the wifi chip out in order to take out the right button board, the screw closest to the right button board is i think stripped, is there an easy and non harming way to the motherboard of taking that screw out?

Saul Calderon - Replica

Rubber band .

Duck -

umm, just took mine apart and there isnt a card nor a card holder.... what?

Joe The total Lord - Replica

Then you have the Wi-Fi only version. Only the model with the 3G modem actually has that slot. This part is the 3G modem module. The actual Wi-Fi chip is on the mainboard not as a separate module.

ccfman2004 -

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 5

Ultimi 7 Giorni: 36

Ultimi 30 Giorni: 108

Tutti i Tempi: 13,433