Introduzione

This guide takes you through installing the SIM card reader on the PlayStation Vita.

  1. Power off and remove the memory card. Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back casing.
    • Power off and remove the memory card.

    • Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back casing.

  2. Using your fingernail or a spudger, pry open the accessory port cover on the top of the device. Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover. Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover.
    • Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.

    • Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover.

  3. Remove the two 5.4mm Phillips #00 screws on the bottom of the device near the charging port. Remove the two 5.4mm Phillips #00 screws on the bottom of the device near the charging port.
    • Remove the two 5.4mm Phillips #00 screws on the bottom of the device near the charging port.

  4. Beginning at the sides of the device, use a plastic opening tool to separate the front and rear cases. Continue working your way around the device gently prying it open. There are still wires holding the front and rear cases together. You may damage the connections if you yank the cases completely apart.
    • Beginning at the sides of the device, use a plastic opening tool to separate the front and rear cases.

    • Continue working your way around the device gently prying it open.

    • There are still wires holding the front and rear cases together. You may damage the connections if you yank the cases completely apart.

  5. Spedizione gratuita per tutti gli ordini superiori a 100,00 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  6. Gently separate the two cases, minding the battery and the touch screen controller connectors holding the two cases together. Gently separate the two cases, minding the battery and the touch screen controller connectors holding the two cases together.
    • Gently separate the two cases, minding the battery and the touch screen controller connectors holding the two cases together.

  7. Using a spudger, free the touch screen controller flex cable by gently prying up the connection.
    • Using a spudger, free the touch screen controller flex cable by gently prying up the connection.

  8. Free the battery cable by gently prying up on the connection with a spudger.
    • Free the battery cable by gently prying up on the connection with a spudger.

  9. Separate the front and rear cases.
    • Separate the front and rear cases.

  10. Gently pry open the tab of the flex cable socket on top of the SIM card reader. Free the flex cable by sliding the spudger underneath it and pulling it out of the socket. Rest the flex cable out of the way.
    • Gently pry open the tab of the flex cable socket on top of the SIM card reader.

    • Free the flex cable by sliding the spudger underneath it and pulling it out of the socket. Rest the flex cable out of the way.

  11. Use a spudger to release the plastic tab along the inside of the case and gently pry up the SIM card reader. Use a spudger to release the plastic tab along the inside of the case and gently pry up the SIM card reader. Use a spudger to release the plastic tab along the inside of the case and gently pry up the SIM card reader.
    • Use a spudger to release the plastic tab along the inside of the case and gently pry up the SIM card reader.

  12. Lift the SIM card reader out of the casing. Using a Phillips #00 screwdriver, remove the blue, 5.0mm screw from the SIM car reader. Separate the SIM card reader from the SIM card reader retainer.
    • Lift the SIM card reader out of the casing.

    • Using a Phillips #00 screwdriver, remove the blue, 5.0mm screw from the SIM car reader.

    • Separate the SIM card reader from the SIM card reader retainer.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Brittany McCrigler

Membro da: 05/03/2012

80.658 Reputazione

132 Guide realizzate

Team

iFixit Membro di iFixit

Community

109 Membri

7.740 Guide realizzate

I have an error relating to the reader on my Vita. If I took it out without replacing it, will it cause the same or different error so I have to replace it, or will it be (somewhat) fine??

christoffersen366 - Replica

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 18

Tutti i Tempi: 6,244