Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
This guide takes your through the process of installing the right button board. This board controls the action, start, and select buttons.
Cosa ti serve
-
-
Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back casing.
-
-
-
-
Using the pointy end of the spudger, disconnect the three antenna cable connectors on top of the wireless card.
-
Deroute the antenna cables so that they are out of the wireless card casing. Rest the wires out of the way.
-
-
-
Pry up the right shoulder button casing with a spudger and set it aside.
-
-
-
Using the pointy end of a spudger, detach the antenna cable on the right button board.
-
Remove the antenna cable.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.