Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

PlayStation Vita Rear Panel Replacement

Introduzione

This guide takes you through the process of installing the rear panel. The rear panel houses the rear touch pad.

Cosa ti serve

  1. PlayStation Vita Rear Panel Replacement, Case Separation: passo 1, immagine 1 di 2 PlayStation Vita Rear Panel Replacement, Case Separation: passo 1, immagine 2 di 2

    • Power off and remove the memory card.

    • Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back casing.

    Traduci

  2. PlayStation Vita Rear Panel Replacement: passo 2, immagine 1 di 3 PlayStation Vita Rear Panel Replacement: passo 2, immagine 2 di 3 PlayStation Vita Rear Panel Replacement: passo 2, immagine 3 di 3

    • Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.

    • Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover.

    Traduci

  3. PlayStation Vita Rear Panel Replacement: passo 3, immagine 1 di 2 PlayStation Vita Rear Panel Replacement: passo 3, immagine 2 di 2

    • Remove the two 5.4mm Phillips #00 screws on the bottom of the device near the charging port.

    Traduci

  4. PlayStation Vita Rear Panel Replacement: passo 4, immagine 1 di 3 PlayStation Vita Rear Panel Replacement: passo 4, immagine 2 di 3 PlayStation Vita Rear Panel Replacement: passo 4, immagine 3 di 3

    • Beginning at the sides of the device, use a plastic opening tool to separate the front and rear cases.

    • Continue working your way around the device gently prying it open.

    • There are still wires holding the front and rear cases together. You may damage the connections if you yank the cases completely apart.

    Traduci

  5. PlayStation Vita Rear Panel Replacement: passo 5, immagine 1 di 2 PlayStation Vita Rear Panel Replacement: passo 5, immagine 2 di 2

    • Gently separate the two cases, minding the battery and the touch screen controller connectors holding the two cases together.

    Traduci

  7. PlayStation Vita Rear Panel Replacement: passo 6, immagine 1 di 1

    • Using a spudger, free the touch screen controller flex cable by gently prying up the connection.

    Traduci

  8. PlayStation Vita Rear Panel Replacement: passo 7, immagine 1 di 1

    • Free the battery cable by gently prying up on the connection with a spudger.

    Traduci

  9. PlayStation Vita Rear Panel Replacement: passo 8, immagine 1 di 1

    • Separate the front and rear cases.

    Traduci

  10. PlayStation Vita Rear Panel Replacement, Battery: passo 9, immagine 1 di 2 PlayStation Vita Rear Panel Replacement, Battery: passo 9, immagine 2 di 2

    • With the help of a spudger, gently pry off and remove the battery cable retainer on the back casing assembly.

    • The easiest access to the battery cable retainer is where the battery cable comes out.

    • You can also use the two small tabs on the side of the cable retainer. Locate the tabs and release one at a time. Be a little careful not to push the cover in and re-lock it.

    Traduci

  11. PlayStation Vita Rear Panel Replacement: passo 10, immagine 1 di 2 PlayStation Vita Rear Panel Replacement: passo 10, immagine 2 di 2

    • Using a Phillips #00 screwdriver, remove the two 5.0mm blue battery case screws.

    • Remove the plastic battery retaining bar.

    Traduci

  12. PlayStation Vita Rear Panel Replacement: passo 11, immagine 1 di 3 PlayStation Vita Rear Panel Replacement: passo 11, immagine 2 di 3 PlayStation Vita Rear Panel Replacement: passo 11, immagine 3 di 3

    • Using your finger or a spudger, lift the battery out and remove it.

    • Guide the battery wires through the hole in the back casing as you remove the battery.

    Traduci

  13. PlayStation Vita Rear Panel Replacement, Rear Panel: passo 12, immagine 1 di 3 PlayStation Vita Rear Panel Replacement, Rear Panel: passo 12, immagine 2 di 3 PlayStation Vita Rear Panel Replacement, Rear Panel: passo 12, immagine 3 di 3

    • Slide the spuder between the right speaker and the rear casing.

    • Using a spudger, gently peel up the right speaker from the light adhesive connecting it to casing.

    • Remove the right speaker.

    Traduci

  14. PlayStation Vita Rear Panel Replacement: passo 13, immagine 1 di 3 PlayStation Vita Rear Panel Replacement: passo 13, immagine 2 di 3 PlayStation Vita Rear Panel Replacement: passo 13, immagine 3 di 3

    • Slide the spudger between the left speaker and the rear casing.

    • Using a spudger, gently peel up the left speaker from the light adhesive connecting it to casing.

    • Remove the left speaker.

    Traduci

  15. PlayStation Vita Rear Panel Replacement: passo 14, immagine 1 di 1

    • The rear panel remains.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 11 persone hanno completato questa guida.

Autore

con 2 altri collaboratori

Brittany McCrigler

Membro da: 03/05/12

89.014 Reputazione

131 Guide realizzate

Distintivi: 48

+45 altri distintivi

Team

iFixit Membro di iFixit

Staff

135 Membri

16.817 Guide realizzate

5 Commenti

I really enjoyed Your article ! I'm about to replace the touch pad, i got a Vita recently but it has some Heavy scuffs. I've seen the back touch pad has adhesive attached on it. I bought a replacement On Ebay. I'm not sure if the replacement has adhesive with it. If it doesn't what would be your guys Thoughts on what i should use?

Daniel - Replica

lol you will need some kind of adhesive its called common sense if Sony use it you use it simple

TH3ORY -

I can't get pass Step 1. I can take out the bottom left screw of the rear touchpad but I can't take out the other 3. I bought a used Vita and there is a screw that turns but does not gout up. What should I do?

kken07655 - Replica

In the part that remains after complete disassembly, what are the two double pins at the top for, which later come into contact with the motherboard? I already have a new panel, but it has absolutely nothing except this one contact in the lower right part ...

Kamil Dębiec - Replica

Those are wifi antennas. You can get it out put it in to the new panel.

repairguy69 -

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 15

Ultimi 7 Giorni: 72

Ultimi 30 Giorni: 335

Tutti i Tempi: 30,316