Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
-
Usa un cacciavite a croce Phillips #00 per svitare le quattro viti da 6,4 mm nella scocca posteriore.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pry up the left shoulder button casing with a spudger.
-
Remove the left shoulder button casing.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the translucent, plastic left shoulder button cover.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Release the left shoulder button flex cable socket by using a spudger to pry open the tab.
-
Using tweezers, slide the flex cable out of the socket. Do not pull on the black tab! Instead, pull the thin flex cable away from the connector (to the left in this image).
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a spudger, gently peel up the left shoulder button from the light adhesive connecting it to casing.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a spudger, lift and release the tab on the ZIF socket sitting on the SIM card reader.
-
Carefully pull the flex cable out of the ZIF socket, and rest it out of the way.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a spudger to release the tab between the SIM card reader and the back casing assembly.
-
Lift the SIM card reader off the back casing assembly.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Release the plastic tab on the small flex cable socket by prying it up with a spudger.
-
Using tweezers, gently remove the small flex cable from the socket, and rest it out of the way.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a spudger to lift up the tab on the large ZIF socket.
-
Gently pull the flex cable out of the ZIF socket, and rest it out of the way.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Disconnect the white Wi-Fi antenna cable with a spudger.
-
Remove the Wi-Fi antenna cable.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a Phillips #00 screwdriver, remove the six screws on the two metal brackets:
-
Two 5.0mm, blue screws on the L-bracket securing the upper left button board to the motherboard.
-
Four 5.0mm, blue screws on the square bracket securing the lower left button board to the motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Starting from the upper left corner, use a spudger to pry up and remove the left button board.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using tweezers, peel up and remove the PS button.
-
Annulla: non ho completato questa guida.
Altre 7 persone hanno completato questa guida.