Introduzione

This guide takes you through the process of installing the left shoulder button on the PlayStation Vita.

  1. Power off and remove the memory card.
    • Power off and remove the memory card.

    • Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back casing.

    Aggiungi Commento

  2. Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.
    • Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.

    • Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover.

    Aggiungi Commento

    • Remove the two 5.4mm Phillips #00 screws on the bottom of the device near the charging port.

    Aggiungi Commento

    • Beginning at the sides of the device, use a plastic opening tool to separate the front and rear cases.

    • Continue working your way around the device gently prying it open.

    • There are still wires holding the front and rear cases together. You may damage the connections if you yank the cases completely apart.

    Aggiungi Commento

  3. Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    • Gently separate the two cases, minding the battery and the touch screen controller connectors holding the two cases together.

    Aggiungi Commento

    • Using a spudger, free the touch screen controller flex cable by gently prying up the connection.

    Aggiungi Commento

    • Free the battery cable by gently prying up on the connection with a spudger.

    Any idea what type of pcb header is on the board for the battery? I have a motherboard with a broken header but I cant source a replacement

    Jimbo Jones - Replica

    This is where I screwed up so I recommend extra caution for other newbies. Only the black part is supposed to come off. Don't be an idiot like me and pry off too much...

    ylimakiminna - Replica

    Yea I messed up there too. Is there a way to fix it?

    Alethia Henry - Replica

    • Separate the front and rear cases.

    Aggiungi Commento

    • Pry up the left shoulder button casing with a spudger.

    • Remove the left shoulder button casing.

    Aggiungi Commento

    • Remove the translucent, plastic left shoulder button cover.

    Aggiungi Commento

    • Release the left shoulder button flex cable socket by using a spudger to pry open the tab.

      • Be careful to not break off this small black tab!

    • Using tweezers, slide the flex cable out of the socket. Do not pull on the black tab! Instead, pull the thin flex cable away from the connector (to the left in this image).

    Aggiungi Commento

    • Using a spudger, gently peel up the left shoulder button from the light adhesive connecting it to casing.

    This step is unneccesary.

    Alexander Mayatsky - Replica

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Brittany McCrigler

Membro da: 05/03/2012

80.096 Reputazione

132 Guide realizzate

Team

iFixit Membro di iFixit

Community

111 Membri

7.290 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 4

Ultimi 7 Giorni: 23

Ultimi 30 Giorni: 80

Tutti i Tempi: 8,030