Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

A damaged or broken cooling fan can make your system overheat so it is important to replace it if that happens in order to prevent any further damage to the system.

  1. On one side of the console (the side adjacent to the fan vent), there will be two 6 mm screws. Unscrew them with a PH #000 screwdriver. On one side of the console (the side adjacent to the fan vent), there will be two 6 mm screws. Unscrew them with a PH #000 screwdriver. On one side of the console (the side adjacent to the fan vent), there will be two 6 mm screws. Unscrew them with a PH #000 screwdriver.
    • On one side of the console (the side adjacent to the fan vent), there will be two 6 mm screws. Unscrew them with a PH #000 screwdriver.

  2. Press and slide the side panel (it will have the two ports) back to reveal an additional 6 mm screw. Unscrew the 6mm screw with a PH #000 screwdriver. Unscrew the 6mm screw with a PH #000 screwdriver.
    • Press and slide the side panel (it will have the two ports) back to reveal an additional 6 mm screw.

    • Unscrew the 6mm screw with a PH #000 screwdriver.

  3. Slide the panel back into place. Slide the panel back into place.
    • Slide the panel back into place.

  4. Using a plastic opening tool, carefully pry the panel from the main console to reveal the HDMI ports. You will probably need to lift it on both sides in order for the panel to come loose. You will probably need to lift it on both sides in order for the panel to come loose.
    • Using a plastic opening tool, carefully pry the panel from the main console to reveal the HDMI ports.

    • You will probably need to lift it on both sides in order for the panel to come loose.

  5. Turn the console over.
    • Turn the console over.

    • Unscrew the two 9 mm screws with a PH #000 screwdriver.

  6. With the plastic opening tool, carefully pry the console shell panel free and lift it away. With the plastic opening tool, carefully pry the console shell panel free and lift it away.
    • With the plastic opening tool, carefully pry the console shell panel free and lift it away.

  7. Using tweezers, carefully pull the multi colored bundled cable from its port connecting the fan to the console. Carefully lift the fan and its wiring from the device.
    • Using tweezers, carefully pull the multi colored bundled cable from its port connecting the fan to the console.

    • Carefully lift the fan and its wiring from the device.

    • Be mindful of damaging the wires.

    • Take care to keep your fingers away from the fan blades.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Sarah Shand

Membro da: 20/02/2017

1.515 Reputazione

7 Guide realizzate

Team

USF Tampa, Team S3-G1, Sullivan Spring 2017 Membro di USF Tampa, Team S3-G1, Sullivan Spring 2017

USFT-SULLIVAN-S17S3G1

3 Membri

13 Guide realizzate

Where do I get a replacement fan tho?

Ponos King - Replica

I think is a 3x3 cm fan, alliexpres has some, but what voltage?

crus - Replica

5V is what i have read

Ethan Amos -

Reference for fan when I have replaced mine : DELTA ELECTRONICS MODEL : ASB0305MA-01 DC 5V 0.19A

herossuperman - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 7

Ultimi 7 Giorni: 33

Ultimi 30 Giorni: 129

Tutti i Tempi: 5,262