Salta al contenuto principale

PlayStation 4 Slim Bottom Cover Replacement

Cosa ti serve

  1. PlayStation 4 Slim Bottom Cover Replacement, Bottom Cover: passo 1, immagine 1 di 3 PlayStation 4 Slim Bottom Cover Replacement, Bottom Cover: passo 1, immagine 2 di 3 PlayStation 4 Slim Bottom Cover Replacement, Bottom Cover: passo 1, immagine 3 di 3
    • Locate the plastic warranty sticker next to the three ports on the side of the console.

    • Remove the warranty sticker by peeling it off with any kind of spudger.

    • Removing the warranty sticker will NOT cause your warranty to be null and void.

  2. PlayStation 4 Slim Bottom Cover Replacement: passo 2, immagine 1 di 2 PlayStation 4 Slim Bottom Cover Replacement: passo 2, immagine 2 di 2
    • Unscrew and remove the 5.0mm screw that was behind the sticker using a T8 security Torx screwdriver with a counter-clockwise motion.

  3. PlayStation 4 Slim Bottom Cover Replacement: passo 3, immagine 1 di 3 PlayStation 4 Slim Bottom Cover Replacement: passo 3, immagine 2 di 3 PlayStation 4 Slim Bottom Cover Replacement: passo 3, immagine 3 di 3
    • Place the Playstation 4 Slim upside down with the side of the screw you just removed facing you.

    • Pry up on the two corners that are facing you with your fingers.

    • This may take a bit of force to open up and you will hear a fairly loud click when the bottom cover detaches.

    • Remove the bottom cover by sliding it towards the back corners and lifting up.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 36 persone hanno completato questa guida.

Team

Cal Poly, Team S19-G4, Livingston Winter 2018 Membro di Cal Poly, Team S19-G4, Livingston Winter 2018

CPSU-LIVINGSTON-W18S19G4

4 Membri

35 Guide realizzate

2 Commenti

Wo kann man die Bodenplatte kaufen?

Emre Kaman - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 22

Ultimi 7 Giorni: 185

Ultimi 30 Giorni: 799

Tutti i Tempi: 47,351