Aggiusta la tua roba Comunità Store

PlayStation 4 Fan Replacement

Introduzione

If your PS4 is running hard and constantly overheating and has led you to replacing the fan, follow the steps below. Be aware that any replacement or teardown beyond the hard drive voids the Sony warranty.

Removing the motherboard separates the original thermal paste between the processor and the heat sink. Before you reassemble your device, reapply a new layer of thermal paste. Follow this guide to learn how.

Cosa ti serve

Panoramica Video

  1. PlayStation 4 Fan Replacement, Remove the upper case: passo 1, immagine 1 di 2 PlayStation 4 Fan Replacement, Remove the upper case: passo 1, immagine 2 di 2

    • Remove the two 9.7 mm Torx screws securing the upper case.

    Traduci

  2. PlayStation 4 Fan Replacement: passo 2, immagine 1 di 3 PlayStation 4 Fan Replacement: passo 2, immagine 2 di 3 PlayStation 4 Fan Replacement: passo 2, immagine 3 di 3

    • Lift the upper case up and back to remove it from the PS4.

    • The upper case in held in place by plastic tabs on the front side. It will take significant force to separate them.

    Traduci

  3. PlayStation 4 Fan Replacement, Remove the upper EMI shield: passo 3, immagine 1 di 2 PlayStation 4 Fan Replacement, Remove the upper EMI shield: passo 3, immagine 2 di 2

    • Remove the twelve 9.7 mm Torx screws securing the upper EMI shield.

    Traduci

  4. PlayStation 4 Fan Replacement: passo 4, immagine 1 di 3 PlayStation 4 Fan Replacement: passo 4, immagine 2 di 3 PlayStation 4 Fan Replacement: passo 4, immagine 3 di 3

    • This step shows you how to properly unscrew the pressure plate.

    • Remove the two 15.6 mm Phillips screws.

    • Gradually unscrew the pressure plate by turning each screw one half turn at a time.

    • Alternate between the two screws to maintain even pressure on the pressure plate.

    • Do not unscrew one side completely before unscrewing the other side or you may damage the processor.

    Traduci

  6. PlayStation 4 Fan Replacement: passo 5, immagine 1 di 1

    • Remove the pressure plate.

    Traduci

  7. PlayStation 4 Fan Replacement: passo 6, immagine 1 di 2 PlayStation 4 Fan Replacement: passo 6, immagine 2 di 2

    • Remove the upper EMI shield.

    Traduci

  8. PlayStation 4 Fan Replacement, Remove the motherboard: passo 7, immagine 1 di 2 PlayStation 4 Fan Replacement, Remove the motherboard: passo 7, immagine 2 di 2

    • Insert the flat end of a spudger in between the fan cable and the motherboard.

    • Twist the spudger to lift the connector straight up and disconnect it from the motherboard.

    Traduci

  9. PlayStation 4 Fan Replacement: passo 8, immagine 1 di 2 PlayStation 4 Fan Replacement: passo 8, immagine 2 di 2

    • Grab the edge of the motherboard on the front of the PS4.

    • Lift the motherboard until the USB ports clear the PS4 case.

    Traduci

  10. PlayStation 4 Fan Replacement: passo 9, immagine 1 di 3 PlayStation 4 Fan Replacement: passo 9, immagine 2 di 3 PlayStation 4 Fan Replacement: passo 9, immagine 3 di 3

    • Lift the motherboard out from the PS4.

    • Apply a new layer of thermal paste to the processor before installing a motherboard using this guide.

    • Failure to properly install new thermal paste will cause your PS4 to overheat.

    • Insert the I/O side of the Motherboard in first, then lower the other side in.

    Traduci

  11. PlayStation 4 Fan Replacement, Fan: passo 10, immagine 1 di 1

    • Remove three, 5mm Phillips head #1 screws.

    • Lift straight up on the metal tray to remove it.

    Traduci

  12. PlayStation 4 Fan Replacement: passo 11, immagine 1 di 2 PlayStation 4 Fan Replacement: passo 11, immagine 2 di 2

    • The fan is now exposed, remove the two 9mm Phillips head #1 screws.

    • If your PS4 has a third screw at the upper right, remove it as well.

    • Lift the fan up to remove it for replacement.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 274 persone hanno completato questa guida.

Autore

con 15 altri collaboratori

Robert Harvey

Membro da: 04/01/14

10.368 Reputazione

5 Guide realizzate

Distintivi: 17

+14 altri distintivi

Team

Cal Poly, Team 8-12, Regan Spring 2014 Membro di Cal Poly, Team 8-12, Regan Spring 2014

CPSU-REGAN-S14S8G12

5 Membri

5 Guide realizzate

35 Commenti

Great guide, but where to buy a fan for the ps4?!

frankeinarhaugen - Replica

Look one ebay, that's where my store gets the majority of out parts from. considering we fix computers.

jonathon saygidia -

Will this guide work with the CUH-1200 model?

Jose Alvizo - Replica

excellent camarade !

Beaux travail !

Attention au principe de peter... Niveaux d'incom.......

je déconne !

P.S. Ne pas se ronger les ongles ca evite les pinces a épiler !

je déconne pas !

Inversement ce pas très esthétique...

Change rien !

Dall - Replica

My PS4 has been overheating so I decided to take it apart and clean it. I cleaned it well but it still over heats the fan will try to start up but cuts back off plz help

Tristen hudson - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 56

Ultimi 7 Giorni: 704

Ultimi 30 Giorni: 3,066

Tutti i Tempi: 498,466