Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
-
Usa la punta di uno spudger per rimuovere dal lato della PS3 il coprivite in plastica nera.
-
-
-
Rimuovi le seguenti sette viti:
-
Sei viti Phillips da 52 mm
-
Una vite Phillips da 30 mm
-
-
-
-
Solleva la cover superiore dal suo bordo posteriore e ruotano verso la parte anteriore della PS3.
-
Rimuovi la cover superiore.
-
C'è un gancio in plastica posizionato in un foro sul retro dell'angolo superiore destro. Spingi con delicatezza con uno spudger il gancio in plastica verso la parte posteriore della console in modo da liberare la parte posteriore destra della console.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two 9 mm Phillips screws securing the memory card reader to the chassis.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift the memory card reader out of the PS3 enough to access its cable.
-
Flip up the retaining flap on the memory card reader ribbon cable socket.
-
Pull the ribbon cable out of its socket.
-
Remove the memory card reader from the PS3.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the flat end of a spudger to pry the Wi-Fi antenna connector up from its socket on the Wi-Fi/Bluetooth board.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use your fingernail to flip up the retaining flap on the Wi-Fi/Bluetooth ribbon cable socket.
-
Pull the Wi-Fi/Bluetooth ribbon cable out of its socket.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the four 9 mm Phillips screws securing the Wi-Fi/Bluetooth board to the chassis.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the Wi-Fi/Bluetooth board from the PS3, minding any cables that may get caught.
-
Annulla: non ho completato questa guida.
Altre 25 persone hanno completato questa guida.
4 Commenti
Note: Only the first 2 generations of PS3 fats have removable Wifi/BT cards. If you have a third generation fat (VER-100 motherboard or later) the Wifi/BT chips are integrated into the board and thereby NOT removable.
does anybody know how many pins there are on the data ribbon / flex cable of the Wifi / Bluetooth board and Card Reader in the 60gb Model? It would be a great help! Thanx
I have a PS3 Slim 2501b can I still use this technique to change my Bluetooth
No you can't
J P -