Menü

Le tue impostazioni

Il mio banco da lavoro

Ottieni un rapido accesso alle guide, ai componenti e alle risposte per i tuoi dispositivi
Il Mio Carrello

Sembra che il tuo carrello sia vuoto

Sfoglia il Nostro Negozio

PlayStation 3 Super Slim Laser Unit Replacement

Scritto Da: ZFix (e 3 altri collaboratori)
  • Commenti: 2
  • Preferiti: 20
  • Completamenti: 10

Difficoltà

Moderato

Passi

12

Tempo Necessario

Suggerisci un tempo??

Sezioni

1

Contrassegni

1

Member-Contributed Guide

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

Introduzione

How to disassemble and change the Laser Unit.

Panoramica Video

  1. Turn off the console and disconnect all cables.

    • Turn off the console and disconnect all cables.

    Traduci

  2. You must remove the warranty sticker and 4 screws. You must remove the warranty sticker and 4 screws. You must remove the warranty sticker and 4 screws.

    • You must remove the warranty sticker and 4 screws.

    Traduci

  3. After removing HDD bay cover, you will see another 3 screw. After removing HDD bay cover, you will see another 3 screw. After removing HDD bay cover, you will see another 3 screw.

    • After removing HDD bay cover, you will see another 3 screw.

    Traduci

  4. Push there to release and remove upper back bezel. Push there to release and remove upper back bezel. Push there to release and remove upper back bezel.

    • Push there to release and remove upper back bezel.

    Traduci

  5. Spedizione gratuita per tutti gli ordini superiori a 100,00 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio

  6. The upper front bezel is harder to remove. The upper front bezel is harder to remove. The upper front bezel is harder to remove.

    • The upper front bezel is harder to remove.

    Traduci

  7. Remove 7 screws to release top cover. Remove 7 screws to release top cover. Remove 7 screws to release top cover.

    • Remove 7 screws to release top cover.

    Traduci

  8. Disconnect two flex-cables and move the Laser Unit. Remove the two screws and the small cable and then take out the Power Supply Unit. Disconnect two flex-cables and move the Laser Unit. Remove the two screws and the small cable and then take out the Power Supply Unit. Disconnect two flex-cables and move the Laser Unit. Remove the two screws and the small cable and then take out the Power Supply Unit.

    • Disconnect two flex-cables and move the Laser Unit. Remove the two screws and the small cable and then take out the Power Supply Unit.

    Traduci

  9. To release the laser unit disconnect this flex-cable. To release the laser unit disconnect this flex-cable. To release the laser unit disconnect this flex-cable.

    • To release the laser unit disconnect this flex-cable.

    Traduci

  10. One flex-cable, for rubbers and the metal bezel. One flex-cable, for rubbers and the metal bezel. One flex-cable, for rubbers and the metal bezel.

    • One flex-cable, for rubbers and the metal bezel.

    Traduci

  11. Disconnect this flex-cable and attach it to the new spare part. Let's start assembling. Disconnect this flex-cable and attach it to the new spare part. Let's start assembling. Disconnect this flex-cable and attach it to the new spare part. Let's start assembling.

    • Disconnect this flex-cable and attach it to the new spare part. Let's start assembling.

    Traduci

  12. Assembling, assembling... Assembling, assembling... Assembling, assembling...

    • Assembling, assembling...

    Traduci

  13. Let's test the device before fully assembling it. .
    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 10 persone hanno completato questa guida.

Autore

con 3 altri collaboratori

ZFix

Membro da: 09/12/2013

162.332 Reputazione

304 Guide realizzate

Distintivi: 35

+32 altri distintivi

Team

Master Techs Membro di Master Techs

Community

280 Membri

783 Guide realizzate

2 Commenti

Aggiungi un commento

Very good job, kudos!

Kevin Borras - Replica

I have found that there are to types of lasers do you sell the second one that does not have the black screws on top but are silver. I have found the one with the silver screws has a smaller laser flex cable and plug. its for the cech-43xx

jack blevinski - Replica

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 22

Ultimi 30 Giorni: 95

Tutti i Tempi: 18,059