Aggiusta la tua roba

Diritto alla Riparazione

Store

PlayStation 3 Smart Plate Replacement

Scritto Da: Walter Galan (e 8 altri collaboratori)
  • Commenti: 7
  • Preferiti: 34
  • Completamenti: 27

Difficoltà

Moderato

Passi

4

Tempo Necessario

10 minuti

Sezioni

1

Contrassegni

0

Introduzione

Use this guide to replace your PlayStation 3's smart plate.

Strumenti

Acquista questi strumenti

Parti

Nessuna parte specificata.

  1. Use the tip of a spudger to remove the black rubber screw cover from the side of the PS3. The screw cover may be underneath a warranty sticker. This sticker will change appearance, and show "VOID" after it has been removed.

    • Use the tip of a spudger to remove the black rubber screw cover from the side of the PS3.

    • The screw cover may be underneath a warranty sticker. This sticker will change appearance, and show "VOID" after it has been removed.

    Modifica

  2. Remove the single 8.5 mm T10 Security Torx screw from the smart plate.

    • Remove the single 8.5 mm T10 Security Torx screw from the smart plate.

    Modifica

  4. Pull the smart plate toward the hard drive bay, then lift it off the body of the PS3. Pull the smart plate toward the hard drive bay, then lift it off the body of the PS3. Pull the smart plate toward the hard drive bay, then lift it off the body of the PS3.

    • Pull the smart plate toward the hard drive bay, then lift it off the body of the PS3.

    Modifica

  5. Be sure to keep track of the small metal bracket loosely held in the top cover, if equipped.

    • Be sure to keep track of the small metal bracket loosely held in the top cover, if equipped.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 27 persone hanno completato questa guida.

0 Commenti

Aggiungi un commento

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 14

Ultimi 30 Giorni: 73

Tutti i Tempi: 22,120