Aggiusta la tua roba Comunità Store

PlayStation 3 Slim Top Cover Replacement

Introduzione

Use this guide to remove the plastic top cover.

Cosa ti serve

  1. PlayStation 3 Slim Top Cover Replacement, Top Cover: passo 1, immagine 1 di 1

    • Turn the PS3 over and lay it on its backside.

    • Carefully peel the warranty sticker up off the lower case to reveal a hidden screw cover.

    • To avoid activating the VOID that may come up, heat the sticker carefully to remove and replace it cleanly.

    Modifica

  2. PlayStation 3 Slim Top Cover Replacement: passo 2, immagine 1 di 2 PlayStation 3 Slim Top Cover Replacement: passo 2, immagine 2 di 2

    • Use the flat end of a metal spudger to pry up the seven screw covers around the edge of the lower case.

    Modifica

  4. PlayStation 3 Slim Top Cover Replacement: passo 3, immagine 1 di 1

    • Remove the seven 37 mm Phillips screws securing the top cover to the lower case.

    Modifica

  5. PlayStation 3 Slim Top Cover Replacement: passo 4, immagine 1 di 1

    • Remove the four 13.3 mm T8 security Torx screws beneath the Blu-ray drive opening. (Some models may only have three screws)

    Modifica

  6. PlayStation 3 Slim Top Cover Replacement: passo 5, immagine 1 di 2 PlayStation 3 Slim Top Cover Replacement: passo 5, immagine 2 di 2

    • Lift the top cover from its rear edge and rotate it toward the front of the PS3.

    • Lift the top cover off the PS3.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 92 persone hanno completato questa guida.

2 Commenti

No good mine a Sony.

james register - Replica

Thank you this helped me so much!!!!

Megan Davis - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 14

Ultimi 7 Giorni: 77

Ultimi 30 Giorni: 320

Tutti i Tempi: 73,301