Salta al contenuto principale

PlayStation 3 Slim Hard Drive Replacement

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Cosa ti serve

  1. PlayStation 3 Slim Hard Drive Replacement, Hard Drive: passo 1, immagine 1 di 2 PlayStation 3 Slim Hard Drive Replacement, Hard Drive: passo 1, immagine 2 di 2
    • Turn the PS3 over and lay it on its backside.

    • Use the flat edge of a metal spudger to pop up the small access door on the bottom cover near the front of the PS3.

    • Remove the blue Phillips screw hidden under the access door.

  2. PlayStation 3 Slim Hard Drive Replacement: passo 2, immagine 1 di 1
    • Slide the hard drive bay cover toward the right side of the lower case, then pull it away from the front edge to remove it from the PS3.

  3. PlayStation 3 Slim Hard Drive Replacement: passo 3, immagine 1 di 2 PlayStation 3 Slim Hard Drive Replacement: passo 3, immagine 2 di 2
    • Using its attached metal handle, pull the hard drive out of its bay.

    • This is a SATA 2.5" Hard Drive. It can be swapped to another HDD or to a SSD, just make sure it meets these two specs.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,143