Aggiusta la tua roba Comunità Store

PlayStation 3 Slim Fan Replacement

Introduzione

Use this guide to replace the PlayStation 3 Slim's single cooling fan.

Cosa ti serve

  1. PlayStation 3 Slim Fan Replacement, Top Cover: passo 1, immagine 1 di 1

    • Turn the PS3 over and lay it on its backside.

    • Carefully peel the warranty sticker up off the lower case to reveal a hidden screw cover.

    • To avoid activating the VOID that may come up, heat the sticker carefully to remove and replace it cleanly.

    Modifica

  2. PlayStation 3 Slim Fan Replacement: passo 2, immagine 1 di 2 PlayStation 3 Slim Fan Replacement: passo 2, immagine 2 di 2

    • Use the flat end of a metal spudger to pry up the seven screw covers around the edge of the lower case.

    Modifica

  3. PlayStation 3 Slim Fan Replacement: passo 3, immagine 1 di 1

    • Remove the seven 37 mm Phillips screws securing the top cover to the lower case.

    Modifica

  4. PlayStation 3 Slim Fan Replacement: passo 4, immagine 1 di 1

    • Remove the four 13.3 mm T8 security Torx screws beneath the Blu-ray drive opening. (Some models may only have three screws)

    Modifica

  5. PlayStation 3 Slim Fan Replacement: passo 5, immagine 1 di 2 PlayStation 3 Slim Fan Replacement: passo 5, immagine 2 di 2

    • Lift the top cover from its rear edge and rotate it toward the front of the PS3.

    • Lift the top cover off the PS3.

    Modifica

  7. PlayStation 3 Slim Fan Replacement, Power Supply: passo 6, immagine 1 di 2 PlayStation 3 Slim Fan Replacement, Power Supply: passo 6, immagine 2 di 2

    • Squeeze the AC inlet connector's locking mechanism and pull straight up to disconnect it from the power supply.

    Modifica

  8. PlayStation 3 Slim Fan Replacement: passo 7, immagine 1 di 1

    • Pull the DC-Out cables straight up to lift their connector up and out of its socket on the power supply.

    Modifica

  9. PlayStation 3 Slim Fan Replacement: passo 8, immagine 1 di 1

    • Remove the two 7.6 mm Phillips screws securing the power supply to the lower case.

    Modifica

  10. PlayStation 3 Slim Fan Replacement: passo 9, immagine 1 di 1

    • Lift the power supply upward from its left edge as viewed from the front of the PS3.

    Modifica

  11. PlayStation 3 Slim Fan Replacement: passo 10, immagine 1 di 2 PlayStation 3 Slim Fan Replacement: passo 10, immagine 2 di 2

    • Continue to lift the left edge of the power supply until it lifts off the two metal posts shown in the second picture.

    • Remove the power supply from the PS3, minding any cables that may get caught.

    Modifica

  12. PlayStation 3 Slim Fan Replacement, Fan: passo 11, immagine 1 di 1

    • Pull the fan cables upward to lift the fan connector up and out of its socket on the motherboard.

    Modifica

  13. PlayStation 3 Slim Fan Replacement: passo 12, immagine 1 di 1

    • De-route the fan cables from under the plastic hook molded into the fan shroud.

    Modifica

  14. PlayStation 3 Slim Fan Replacement: passo 13, immagine 1 di 1

    • Remove the two 9.5 mm Phillips screws securing the fan to the heat sink.

    Modifica

  15. PlayStation 3 Slim Fan Replacement: passo 14, immagine 1 di 1

    • Lift the fan out of the heat sink, minding any cables that may get caught.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 61 persone hanno completato questa guida.

Un commento

Andrew, excellent prestation.

Gary Dunn - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 10

Ultimi 7 Giorni: 72

Ultimi 30 Giorni: 365

Tutti i Tempi: 73,169